SICONOFLOOR RR100-E

Pigmented resin. Ideal as a sealing coating for smooth systems and systems sprinkled with aggregate

Pigmented, two-component, solvent free, epoxy, low-viscosity resin. Ideal as a sealing coating for smooth systems and systems sprinkled with aggregate.

Product data sheet SICONOFLOOR RR100-E

Use

Properties

Physical properties of Siconofloor RR100-E
Form Component A modified colorful epoxy liquid
Component B amine curing agent
Density (according to PN EN ISO 1675) Component A 1.05~1.2 g/cm3
Component B 0.99~1.15 g/cm3
Suitability for use 30 minutes at 20oC
Theoretical consumption of the blend 0,15~0,2 kg/m2 when used as a varnish
Color and odor Component A colorful and odorless
Component B transparent, with a characteristic odor
Hygiene tests Meets the requirements; Hygienic Certificate No. HK/B/0757/01/2015
Curing time Light load 24h at 25oC
Full load 7 days
Viscosity (Brookfield DV-II). The test was conducted at 18.4oC using 04 spindle and 20 RPM rotational speed. Component A 2740 mPa*s
Component B 700~732mPa*s

Mechanical properties of Siconofloor RR 100-E
Dust dryness 12 hours at 20oC
ShA hardness (after 7 days) 100o
ShD hardness (ShD hardness after 7 days, 80 ShD) 80o

Application
Application methods First mix A component, then add B component, mix the components until a uniform consistency, but not for less than 3 minutes. Stirring ratios of Component A and Component B are indicated on the packaging and they must not be changed. Changing the proportions results in a product with characteristics different from the ones declared by the manufacturer. Over mixing can cause air entrainment and therefore it should be avoided. Use low speed electric stirrer for the resin mixing (300 ÷ 400 rpm) or another suitable equipment.
Priming coating Apply SICONOFLOOR RR100-E using a roller or trowel depending on the substrate structure, ensure that a uniform and continuous coating is obtained.
Smooth systems sealing coating Apply SICONOFLOOR RR100-E using a synthetic fiber roller with fine bristles according to the art of painting; ensure that a uniform and continuous coating is obtained.
Sprinkled systems sealing coating Apply SICONOFLOOR RR100-E using a roller or trowel depending on the target structure, ensure that a uniform and continuous coating is obtained. Apply a second coat if necessary. Wash tools with acetone or xylene immediately after use. Hardened or cured material can only be removed mechanically.
Conditions of the system components storage SICONOFLOOR RR100-E resin is a material with a reduced tendency to crystallization process. Store it in a dry place at +5~30oC. Components A an B in a liquid state are the agents causing water pollution and should not get into drains, soil and watercourses. After curing the resin is environmentally neutral.