SICONOFLOOR PU SATIN

Colorless, waterborne varnish. Ideal as a sealing coating for smooth systems and systems sprinkled with aggregate

Colorless, two-component, waterborne, polyurethane varnish. Ideal as a sealing coating for smooth systems and systems sprinkled with aggregate. It is characterized by satin (semigloss) effect. Increases mechanical and functional parameters of the flooring.

Product data sheet SICONOFLOOR PU SATIN

Use

Properties

Physical properties of Siconofloor PU SATIN
Form Component A white, odorless liquid
Component B colorless curing agent
Density (according to PN EN ISO 1675) Component A 0.95~1.1 g/cm3
Component B 0.99~1.15 g/cm3
Suitability for use 3 hours at 23oC
Theoretical consumption of the blend 0,15~0,2 kg/m2 when used as a varnish
Color and odor Component A white and odorless
Component B transparent and odorless
Hygiene tests Meets the requirements; Hygienic Certificate No. HK/B/0757/02/2015
Curing time Light load after 24h at 25oC
Full load 7 days
Viscosity (Brookfield DV-II). The test was conducted at 18.4oC using 04 spindle and 20 RPM rotational speed. Component A 1450~1650 mPa*s
Component B 630~660 mPa*s

Application
Application methods First mix A component, then add B component, mix the components until a uniform consistency, but not for less than 3 minutes. Stirring ratios of Component A and Component B are indicated on the packaging and they must not be changed. Changing the proportions results in a product with characteristics different from the ones declared by the manufacturer. Over mixing can cause air entrainment and therefore it should be avoided. Use low speed electric stirrer for the resin mixing (300 ÷ 400 rpm) or another suitable equipment.
Smooth systems sealing coating Apply SICONOFLOOR PU SATIN using a synthetic fiber roller with fine bristles according to the art of painting; ensure that a uniform and continuous coating is obtained. Apply while maintaining efficiency of approx. 70 g/m2. Paint using crosswise method of painting.
Sprinkled systems sealing coating Apply SICONOFLOOR PU SATIN using a synthetic fiber roller with fine bristles according to the art of painting; ensure that a uniform and continuous coating is obtained. Apply while maintaining efficiency of approx. 70 g/m2. Paint using crosswise method of painting. Wash tools with water immediately after use. Hardened or cured material can only be removed mechanically.
Conditions of the system components storage SICONOFLOOR PU SATIN resin is a material with a reduced tendency to crystallization process. Store it in a dry place at +5~30oC. Components A an B in a liquid state are the agents causing water pollution and should not get into drains, soil and watercourses. After curing the resin is environmentally neutral.