Colorless, waterborne varnish with the effect of the flooring surface matting

Colorless, two-component, waterborne, polyurethane varnish with the effect of the flooring surface matting. Ideal as a sealing coating for smooth systems and systems sprinkled with aggregate. Increases mechanical and functional parameters of the flooring.

Product data sheet PU MATIN

Use

Properties

Physical properties of Siconofloor PU MATIN
Substance Component A white, odorless liquid
Component B colorless, odorless curing agent
Hygiene tests Meets the requirements; Hygienic Certificate No. HK/B/0757/02/2015
Density (according to PN EN ISO 1675) Component A 0.95~1.1 g/cm3
Component B 0.99~1.15 g/cm3
Suitability for use 6 hours at 23oC
Theoretical consumption of the blend 0.1 ~ 0.15 kg/m2 depending on the flooring structure
Full load 7 days
Viscosity (Brookfield DV-II). The test was conducted at 18.4oC using 04 spindle and 20 RPM rotational speed. Component A 1450~1650 mPa*s
Component B 630~660 mPa*s

Application
Application methods First mix A component, then add B component, mix the components until a uniform consistency, but not for less than 3 minutes. Stirring ratios of Component A and Component B are indicated on the packaging and they must not be changed. Changing the proportions results in a product with characteristics different from the ones declared by the manufacturer. Over mixing can cause air entrainment and therefore it should be avoided. Use low speed electric stirrer for the resin mixing (300 ÷ 400 rpm) or another suitable equipment.
Smooth systems sealing coating Apply SICONOFLOOR PU MATIN using a synthetic fiber roller with fine bristles according to the art of painting; ensure that a uniform and continuous coating is obtained. Apply while maintaining efficiency of approx. 100 g/m2. The material consumption increases with the degree of roughness of the flooring. Paint using crosswise method of painting.
Sprinkled systems sealing coating Apply SICONOFLOOR PU MATIN using a synthetic fiber roller with fine bristles according to the art of painting; ensure that a uniform and continuous coating is obtained. Apply while maintaining efficiency of approx. 70 g/m2. Paint using crosswise method of painting. Wash tools with water immediately after use. Hardened or cured material can only be removed mechanically.
Conditions of the system components storage SICONOFLOOR PU MATIN resin is a material with a reduced tendency to crystallization process. Store it in a dry place at +5~30oC. Components A an B in a liquid state are the agents causing water pollution and should not get into drains, soil and watercourses. After curing the resin is environmentally neutral.